Find the exact quick-release bracket you need for your trolling motor. Every supported motor, every part number — all in one place.
💡
How to use this guide
The SwitchBlade mount fits every Sea-Doo Switch made from 2021–2026. What varies is the quick-release bracket — a small adapter that connects your specific trolling motor to the mount. Find your motor below, match the bracket part number, and click any compatible row to go directly to that bracket on our product page.
Status Key:✓ Compatible⚠ Use With Caution✗ Not Compatible
🚤
Sea-Doo Switch Boat Models
2.15" × 1.6"
2021 – 2026
100% Bolt-On, No Drill
80 lbs
✓
Switch Sport13 ft · 2021–2026
✓
Switch Cruise18 ft · 2021–2026
✓
Switch Cruise 13018 ft · 2021–2026
✓
Switch Fish18 ft · 2021–2026
✓
Switch Cruise 17021 ft · 2021–2026
✓
Switch Cruise 23021 ft · 2021–2026
🔹 Quick-Release Bracket Required — Sold Separately
A motor-specific quick-release bracket is required to install your trolling motor onto the SwitchBlade mount. This bracket is not included with your SwitchBlade purchase and must be ordered from your motor's manufacturer or an authorized reseller. Each motor uses a different bracket — use the sections below to find your correct part number before ordering.
Four bracket options — click any part number to go directly to that bracket. MKA-16-03 is a slide-on style QD bracket. MKA-21, RTA-17, and RTA-54 are drop-on, pin-secured style QD brackets.
Exceeds safe limits. The 36V Kraken produces thrust that may damage the mount or Switch railing. UMW does not support this configuration. Use at your own risk.
Two bracket options depending on motor configuration — click either part number to view on the product page. Verify the correct bracket with Haswing prior to ordering, or contact us for help.
🚫
Universal Restrictions
Feature / Motor TypeStatusNotes
Stern Mount Motors
Status
✗ Not Compatible
Notes
SwitchBlade is designed exclusively for bow mount trolling motors.
Auto Deploy / Auto Stow
Status
✗ Not Compatible
Notes
The SwitchBlade does not support automatic deploy or stow systems. Manual operation only.
Motors Over 80 lbs Thrust
Status
⚠ Not Recommended
Notes
Exceeding 80 lbs thrust may damage the mount or Switch railing. Warranty does not cover over-spec motor damage.
Motor Without Quick-Release Bracket
Status
✗ Not Compatible
Notes
Bracket required. A motor-specific quick-release bracket is mandatory. Brackets are not included with the SwitchBlade — see part numbers in the sections above.
Ready to Upgrade Your Sea-Doo Switch?
The SwitchBlade installs in under 45 minutes with basic hand tools — no drilling, no permanent modifications.
